Quantity
Total
Product successfully added to your shopping cart
There are 0 products in your cart.
There are 0 products in your cart.
Total
CAME kompatibel Funkempfängermodul im Gehäuse, 2-kanal universal Empfänger für CAME TOP, TWIN, TAM handsender. 12-24V AC/DC, NO/
- Universal 2-channel 12-24V AC/DC receiver
- Can be programmed with: CAME TOP, TWIN, TAM 433,92MHz remote controls!!!
- Frequency: 433.92Mhz fixed / rolling code!!!
- Range: Up to 100 - 200 meters!!!
- Memory up to 400 remotes!!! This universal 433.92Mhz rolling / fixed code 2-channel receiver 100% compatible with CAME TOP, TWIN, TAM 433,92MHz remote controls. The 2 channels allows you to operate 2 different garage gates and /or other electronics using your original Mhouse remote control. Parameters: 433.92Mhz rolling / fixed code frequency 2-channel receiver Memory: Up to 400 remotes!! INSTRUCTIONS FOR PROGRAMMING RECEIVER: Learning new remotes: Press "learn 1" or "learn 2" button - Learn LED will go on. Then press the button which you wish to learn on your remote control. Learn LED will start blinking and go off - This means that you have successfully learned your remote to the receiver. Repeat the above steps for other transmitters. Erasing receivers memory--> Press "learn 1" or "learn 2" and keep holding until Learn LED will go off - Once Learn LED is off, it means that you have successfully erased the memory of the appropriate channel. HOW TO CONNECT YOUR RECEIVER: Connect 2 wires of CH1 or CH2 to your control board between: 1) COM and N/O, 2) COM and P/P (Push button) in parallel to Push button. All you need to do is to connect this receiver to your control board by using only 4 wires (2 - for power; 2 - for relay!!!) Note: The abriviations of your board can be different, so follow your manual. v=NfpZvDAadWU&feature=youtu.be .
English 
Deutsch