Belfox 7834 kompatibel handsender, klone fernbedienung, 4-kanal 868.3Mhz fixed code

This is a high quality Belfox 868.3Mhz clone remote, that clones your Belfox HS868-20 / 7834VA / 7834 mini / 7834 -E remote controls. Parameters: 868.3Mhz frequency; 4 channels ; Battery and keychain included; High quality Belfox CLONE remote!!! HOW TO CLONE YOUR REMOTE: You need to erase the remote first : 1) Press and hold LOCK and UNLOCK buttons together - Led will flash 3 times 2) Keep holding LOCK button, press UNLOCK button 3 times, Led will start flashing Non-Stop. The clone remote is clear and ready for cloning. Next you need to clone your original remote : 1) Place both remotes Side by Side or Into back to Back position (II). Make sure they have direct contact , touching each other. 2) Press and hold 1 button on your original remote and 1 button on your clone remote. Keep pressing both buttons until led will make : 2 blinks > 3 blinks > Steady = Successfully cloned, only after the light goes into steady. If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please slide the remote slowly up and down, until you get the point where it will go through. v=8tYmG7ZoedA . v=QwEUOa6cck4 Note: you don't need an access to you control board or receiver!!! IF YOU HAVE ANY QUESTIONS ABOUT YOUR PURCHASE PLEASE CONTACT US!